before you begin with the work,  you should absolutely, which most important safety rules consider  Nearly all the lamps of any type for the operation of 230V AC likely to be connected immediately!                        It does not matter whether it is a ceiling fan, , Down Light, lights, fluorescent lamps, or a transformer, for spots!      Basically, you should at your blankets or - on your wall a 3-pin cable (black, blue, green- yellow) For older buildings are perhaps other colors (black = green, blue = gray, green- yellow = red)      Occupancy of wires: Black is one of the lamp to the terminal L (P). Blue on the terminal N and Green-Yellow on the terminal with the grounding symbol (PE)      Should you only 2 wires available as black and blue, you must necessarily in the lamp terminals N and PE together. This ensures that the housing of your lamp is protected and you with an error in the bulb does not shock you get when you touch!      There is also the possibility that a lamp at clamping only 2 seats are available, namely L and N. It should be on a lamp, the Full plastic or something similar,. If not, but somewhere you have a terminal for the grounding.    If not really clamp body is present, then you need this lamp is not earth, you can use the yellow-green wire then simply isolate.
©2008 Rieplay.com our partners:      engineering   electrical engineering   painting wall Important note! The work with power can be dangerous and should only be professionals! We give tips on just right execution. About Take no liability or the like for damages for improper execution! So if in doubt, always an electric expert advice! Please visit our imprint