telephone sockets

In simple phone connection, with a TAE is the incoming leadership to 1 / 2.

In connection with a double TAE NFF is the first line to the upper bar connected to the second line at the lower bar.

Of the NFN to a tin can connected devices at the same time only one used. If into a socket plugged in N-enabled device, it separates the underlying devices from the pipe. For example, if a conventional modem to the left N-female infected, the right N-socket and the F-jack still active.

If this, however, a modem connection, the phone is still active. Should the handset from the phone considerably hears only data noise. However, it may happen when to put down the phone of the listener, the modem is disconnected.

What is perhaps also important: Should the PC for whatever reason workshop times to be absolutely the N-connector from the phone box removed. Not only that cable modem unplug.

The modem grind the phone signal, if it was pinched off to a contact gap and the phone remains silent.

The same is true for the left-and medium-sized jack of NF / F-box, but the right F-electric jack is from the other two independent. on the right socket, a 2nd Telephone number can be connected. thus can be 2 devices in separate lines or with different numbers show.

TAE-F schematic

TAE-NFN schematic

TAE-NFF schematic

The TAE doses plant is the incoming leadership to the terminals 1 and 2.

The artery-related pair is from 6 to 1 and 5 to 2 up.

It should be noted when an F-Code device used by the rest of the plant except cans operation. If a plant with multiple devices and N-An F-operated device, the TAE-F-box at the end of the system.

Layer-Ads - Das Werbenetzwerk von morgen

our partners: engineering electrical engineering painting wall

Important note!

The work with power can be dangerous and should only be professionals! We give tips on just right execution. About Take no liability or the like for damages for improper execution! So if in doubt, always an electric expert advice!

Please visit our imprint